The Atlas® vane is the same profile as the Alpha vane but it is made in our AR1000 material. It combines Torque + Forgiveness + Durability. The vane features an Advanced Torque Apex with a gradual taper to the tail which gives you optimal balance of spin and stealth. The vane measures 2.8″ (71.1mm) in length, 0.45″ in height (11.4mm) for low clearance, and each vane weighs 9.0 grains. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups. This vane excels as a 3D Vane, Hunting Vane, Indoor Target Vane, and is within the specifications to use on NASP arrows.
Bohning’s AR1000 Material is Bohning’s original vane material that provides for excellent adhesion and durability, while being extremely forgiving for any potential contact.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. For our most durable and flexible adhesion, Bohning suggests using Fletch-Tite Platinum® for our AR1000 material. If faster cure times are needed, we recommend BlazerBond® or Fletch Fuse®adhesives.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
The Atlas® vane is the same profile as the Alpha vane but it is made in our AR1000 material. It combines Torque + Forgiveness + Durability. The vane features an Advanced Torque Apex with a gradual taper to the tail which gives you optimal balance of spin and stealth. The vane measures 2.8″ (71.1mm) in length, 0.45″ in height (11.4mm) for low clearance, and each vane weighs 9.0 grains. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The low profile allows clearance on even the tightest set-ups. This vane excels as a 3D Vane, Hunting Vane, Indoor Target Vane, and is within the specifications to use on NASP arrows.
Bohning’s AR1000 Material is Bohning’s original vane material that provides for excellent adhesion and durability, while being extremely forgiving for any potential contact.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. For our most durable and flexible adhesion, Bohning suggests using Fletch-Tite Platinum® for our AR1000 material. If faster cure times are needed, we recommend BlazerBond® or Fletch Fuse®adhesives.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Image 1 of 28
Image 2 of 28
Image 3 of 28
Image 4 of 28
Image 5 of 28
Image 6 of 28
Image 7 of 28
Image 8 of 28
Image 9 of 28
Image 10 of 28
Image 11 of 28
Image 12 of 28
Image 13 of 28
Image 14 of 28
Image 15 of 28
Image 16 of 28
Image 17 of 28
Image 18 of 28
Image 19 of 28
Image 20 of 28
Image 21 of 28
Image 22 of 28
Image 23 of 28
Image 24 of 28
Image 25 of 28
Image 26 of 28
Image 27 of 28
Image 28 of 28