The Alpha® vane is a new profile for Bohning that combines Stealth + Speed + Torque. The vane features an Advanced Torque Apex with a gradual taper to the tail which gives you optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The vane measures 2.8″ (71.1mm) in length, 0.45″ in height (11.4mm) for low clearance, and each vane weighs 8.5 grains. The Alpha vane excels as a 3D Vane, Hunting Vane, Indoor Target Vane and a Crossbow Vane.
The Alpha vane is made from Bohning’s AR1250 Material. It is a stiffer material that allows for fast, ultra-quiet flight over longer distances. Our stiffer material also provides maximum speeds when fletched at a 1 degree offset, while staying silent. Bohning AR1250 is also our lightest material.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. We recommend Blazer Bond® or Fletch Fuse® adhesives for best adhesion for the Apha Vane. Do not use solvent-based glues.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
The Alpha® vane is a new profile for Bohning that combines Stealth + Speed + Torque. The vane features an Advanced Torque Apex with a gradual taper to the tail which gives you optimal balance of spin and stealth. At the rear of the vane, you will see a contoured tail which minimizes vane flutter. Less vane flutter reduces noise and helps retain speed. The vane measures 2.8″ (71.1mm) in length, 0.45″ in height (11.4mm) for low clearance, and each vane weighs 8.5 grains. The Alpha vane excels as a 3D Vane, Hunting Vane, Indoor Target Vane and a Crossbow Vane.
The Alpha vane is made from Bohning’s AR1250 Material. It is a stiffer material that allows for fast, ultra-quiet flight over longer distances. Our stiffer material also provides maximum speeds when fletched at a 1 degree offset, while staying silent. Bohning AR1250 is also our lightest material.
All Bohning vanes are pre-primed and do not require vane cleaning or pen primers. We recommend Blazer Bond® or Fletch Fuse® adhesives for best adhesion for the Apha Vane. Do not use solvent-based glues.
Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.
Image 1 of 26
Image 2 of 26
Image 3 of 26
Image 4 of 26
Image 5 of 26
Image 6 of 26
Image 7 of 26
Image 8 of 26
Image 9 of 26
Image 10 of 26
Image 11 of 26
Image 12 of 26
Image 13 of 26
Image 14 of 26
Image 15 of 26
Image 16 of 26
Image 17 of 26
Image 18 of 26
Image 19 of 26
Image 20 of 26
Image 21 of 26
Image 22 of 26
Image 23 of 26
Image 24 of 26
Image 25 of 26
Image 26 of 26